Decorator Work Tool List

ANY WORKER THAT SHOWS UP TO A WORK CALL
NOT APPROPRIATELY DRESSED AND WITH THE FOLLOWING
TOOLS WILL WAIVE ANY RIGHTS TO A FOUR HOUR CALL AS
PER CONTRACT!!

Decorator Tool List

• Hammer

• Screwdriver

• Pliers

• Crescent Wrench

• Staple Gun (Arrow JT-21)

• Phillips Screwdriver

• Utility Knife, may be razor knife, etc.

• Tape Measure (25' min.)

• Pry bar

• Wire cutters (Diagonal)

• One set each standard and metric allen wrenches

• One set each open and box end wrenches

• 1/4" ratchet set. 5mm tip and TORX 30 tip (star key)

• Tool belt or apron
  

• Top carpet cutter

• Loop pile carpet cutter

• Battery operated screw gun (7.2 volts or higher and tips)

• BALL POINT PEN !

ALL WORKERS MAY BE ASSIGNED BY THE COMPANY OR STEWARD
WHEN CALLED FOR ONE POSITION MAY BE TRANSFERRED TO ANOTHER POSITION AT
ANY TIME ON THE SAME SHOW! THIS MEANS THAT ALL WORKERS FOR ANY POSITION
(INCLUDING FORK DRIVERS & RIGGERS) MUST HAVE THEIR TOOLS WITH THEM!

Theater Tool List (Straz/TBPAC/Ruth Eckerd Hall/Mahaffey/Capitol)

Minimum requirements:

• Adjustable wrench (Crescent wrench)

• 9/16” socket w/drive ratchet or 9/16”speed ratchet

• Phillips screwdriver

• Straight head screwdriver

• Pliers (Slip joint or adjustable joint)

• Side cutter (Diagonal cutter)

• Knife

• Flashlight

• Hammer

• Tape measure

• Gloves

• MUST BRING DRESS BLACK CLOTHING FOR SHOW CALLS